The Time Video Inserter LAN is a compact system, to meet all the necessary requirements in a studio or an OB Van van.
The Time Video Inserter LAN inserts both the UP / Down timer information and the Timecode information on the passing video.
The time code generator can be synchronized using an external NTP server or an LTC timecode signal.
The LTC reads SMPTE / EBU unit inserts the timecode on an SDI video signal or can be synchronized using an external NTP server.
Time zones as well as parameters can be configured via a web page.
There are two SDI outputs with an input SDI loop.The inserter and time code converter is compatible with digital video formats 3G, HD and SD.
Several font sizes are available and the fonts can be placed anywhere on the video using horizontal and vertical controls (in preset position).
The font size can be small, medium, large, big and bigx2.
The background of the displayed characters can be transparent or not.
The font colors can be selected from a choice of 8 RGB colors.
The unit is easily configurable using the front panel controls.
The Ethernet interface connects the Time Video Inserter Lan to the LAN / WAN network.
The configuration menus can be accessed from anywhere within the network through a browser.
In NTP client mode, an external NTP can be routed with a server for real-time reference of the time code generator.
Status monitoring is visible in the front display or in the web interface via the browser.
The front panel controls consist of four buttons used to navigate the various configuration menus. These are displayed on a 16 x 2-character LCD display.
The Remote Time Video Inserter is the remote unit of the Time Video Inserter.
The unit is composed of a 2-line, 16-character LCD display showing both the Timecode and the UP / DOWN timer information.
You can select the UP Counter, Down Counter and Timer mode via 3 selection keys.For easy setting of numerical values, backlit numerical keys have been set up that allow a quick configuration of the values to be set.
The LED display shows the hours, minutes, seconds and frames for a real time control of the counts or timecodes.
Use the numeric keypad to enter the starting number of the count.
Press the PLAY key to start the count and press it again to pause.
Use the RESET key to restart the count from the starting number.
With the STOP key the count stops at the starting number.In Clock mode it is possible to select the output display mode (HH: MM, HH: MM: SS or HH: MM: SS: FF).
An NTP server or an LTC signal via the video connector can be used to align the internal timer as a reference in real time.
Through an Ethernet connection can be synchronized all the timers directly in your network.The parameters are configurable via a web interface.The set values are saved in a buffer memory if the device is switched off.
The NTP / LTC Satellite is the LED remote unit with a red seven-segment display.
The size of the numbers is 56mm.
Built-in quartz clock allows continuous operation even if a there is a drop in the signal.
The NTP / LTC Satellite shows the hours, minutes and seconds and frames, in eight-digit format.
The brightness can be adjusted via a web page.
The NTP / LTC Satellite is equipped with an RJ45 port. The supported protocol is NTP or LTC.
The dimensions are 443 x 86 x 140 mm
NTP/LTC Satellite specifications:
• 8-digit LED display for hours, minutes, seconds, frames.
• Size 56 mm
• Red color
• Universal power supply (86-264 VAC)
• Dimensions 443 x 86 x 140
In accordance with constant improvement policy of products, El.Man (Elettronica Mangione) reserves the right to modify without notice and at any time, features and prices of its own apparatus.